Citroën C6 (2005-2012)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out the four caps that secure the upper part of the bumper.
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, unscrew the screws that secure the fender liner (front).
-move the fender liner to the side and Unscrew the screws that secure the corners of the bumper to the wings.
-around the perimeter of the lower part of the bumper, Unscrew ten screws (spun up).
-we release the clips under the hood.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look behind the wires and hoses).
-disconnect electrical connectors.
-disconnect the headlight washer hoses (liquid may leak).
Rear bumper
-open the trunk lid.
-from the trunk, unscrew the nuts and remove the rear lights.
-under the rear lights, unscrew the screws (spun down).
-from the bottom, unscrew the screws and nuts (spun up).
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights.
-we release the latch in the opening of the trunk.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.