How to remove the front and rear bumper Citroen C4 Cactus
Citroen C4 Cactus I (2014-2023)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood, unscrew the screws that secure the upper part of the bumper (pad).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, unscrew the screws that secure the fender liner and fender liner (front).
-we release the lining of the wings from the bumper (you need to put your hand behind the fender liner, in turn, starting from the bottom, squeeze the latches with your fingers and pull the lining towards you).
-on the perimeter of the lower part, Unscrew the screws (spun up).
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-from the bottom, unscrew the six screws (spun up).
-in the wheel wells, unscrew the screws that secure the fender liner and wing lining (rear).
-we release the lining of the wings from the bumper (you need to put your hand behind the fender liner, in turn, starting from the bottom, squeeze the latches with your fingers and pull the lining towards you).
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights (if you are afraid to break, unscrew one nut on each side of the trunk side trim and remove the rear lights).
-we release the latch in the opening of the trunk (pull towards you).
-with an assistant, pull the bumper back (look for the wires).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
