-
-
-
Citroen C3 (SX/SY) III (2016-2023)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood, unscrew the screws that secure the upper part of the bumper (radiator grille).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, unscrew four screws on each side that secure the fender liner (front).
-move the fender liner to the side and unscrew the screws that secure the sides of the bumper to the wings.
-unscrew the screws at the bottom (spun up).
-we release the sides of the bumper in the wings.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-from the trunk, unscrew the two nuts and remove the rear lights.
-from the bottom, unscrew the four screws.
-in the wheel wells, unscrew four screws on each side that secure the fender liner (rear).
-move the fender liner to the side and unscrew one screw on each side (spun down) that secure the bumper corners and clips to the wings.
-we release the plastic clips in the wings (which are fastened with screws, you need to pull it towards you).
-we release the latches under the rear lights.
-we release the sides of the bumper from the wings (pull down).
-we release the latch in the opening of the trunk.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español