Citroen C3 Picasso (2008-2017)
Front bumper
-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the upper part of the bumper.
-from the bottom Unscrew the two screws and take out the four clips (twisted and inserted from the bottom up).
-wrenched the wheel to the side.
-wheel arches free lockers (you need to access the inner part of the bumper).
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners themselves).
-with the assistant pulls the bumper forward (try not to break the wires).
-remove the connectors from the fog lights.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew the four screws.
-wheel arches take out the rivets and removed the arch liners (no need to remove).
-the fender liner, Unscrew the screws holding the corners of the bumper to the wings.
-unscrew the screws that attach the lower part.
-we release the latch in the wings (pull the corners themselves) and opening the trunk.
-with the assistant pulls back (don't want to break the wires).
-snap together the connectors of electrical equipment.