Depending on the model year and body type of attachment are different.
-open the hood.
-from the side of the engine compartment, Unscrew the screws that attach the bumper to the brackets or the brackets to the body.
-Unscrew the screws that attach the bottom of the bumper.
-depending on which side we will disassemble, wrenched the wheel.
-wheel arches free lockers (no need to remove).
-for wheel arch liners Unscrew two screws on each side that attach the angles to the wings.
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
-open the trunk lid.
-remove the plastic cover of the rear panel.
-the casing Unscrew the four screws.
-wheel arches take out the rivets and removed the fender liner.
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-Unscrew the two screws at the bottom.
-pulls the bumper back.