Citroën DS4 (2010-2018)
Depending on the year of manufacture, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood, unscrew the screws that secure the upper part of the bumper.
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, unscrew the screws that secure the fender liner (front) and the sides of the bumper.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-we release the latch under the hood.
-we release the bumper from the latches in the wings (pull the corners towards you). Or we unscrew two screws on each side that attach the plastic mounts to the wings.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-from the bottom, unscrew the screws (spun up) that secure the lower part of the bumper.
-in the wheel wells, unscrew the screws that secure the fender liner (rear) and the sides of the bumper.
-for the fender liner, unscrew two screws on each side that secure the corners of the bumper to the wings.
-we release the clips in the wings (pull the corners of the bumper down).
-we release the latches under the rear lights.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.