-
-
-
Citroen Berlingo III K9 (2018+)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood, unscrew the screws that secure the upper part of the bumper.
-unscrew the screws from the bottom (spun up).
-depending on which side we will disassemble turn the wheels.
-in the wheel wells, unscrew three screws on each side and release the fender liner.
-we release the clips and latches in the wings that secure the sides of the bumper.
-with an assistant, pull the bumper forward (look behind the wires and hoses).
-remove connectors from electrical equipment.
-disconnect the headlight washer hoses (if any).
Rear bumper
-open the lid (doors) of the trunk.
-in the opening of the trunk, unscrew six screws (depending on the year, the number of screws may vary).
-unscrew the screws from the bottom (spun up).
-in the wheel arches release the fender liner.
-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.
-release the latches in the wings (gently pull the corners towards you).
-we release the latches under the rear lights.
-with an assistant, pull the bumper back (look for the wires).
-disconnect connectors from electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español