How to remove the front and rear bumper Citroen Jumpy (2006-2016)

Citroen Jumpy (Dispatch) II (2006-2016)

Depending on the year of manufacture, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood take out the four pistons that secure the upper part (radiator grille).

-from the side of the bottom, unscrew the screws and release the clamps (the clamps must be rotated 90 degrees).

-unscrew the screws in the wheel arches that secure the fender liner (front).

-unscrew the screws that secure the corners of the bumper to the wings.

-in the inner part of the wings, we release two fixing elements on each side (you need to hook and turn).

-with an assistant, pull the bumper forward from the guides in the wings (be careful not to break the wires).

-disconnect the connectors from the electrical equipment (if any).

Rear bumper

-open the lid (doors) of the trunk.

-in the opening of the trunk, unscrew the six screws.

-unscrew the screws from the bottom (spun up).

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, pull the bumper back (we'll look at the wires).

-disconnect electrical connectors.

How to remove the front and rear bumper Citroen Jumpy (1994-2007)

How to remove the front and rear bumper Citroen Jumpy (2016-2023)