-open the hood.
-under the hood, Unscrew the four screws and remove the grille.
-under the grille, Unscrew the three screws.
-from the bottom Unscrew the screws and release the clips (need rotate 90 degree) holding the fender liner, protection, and the lower part of the bumper.
-wrenched the wheel to the side.
-wheel arches free lockers (you need to access the inner part of the bumper).
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-with the assistant pulls the bumper forward (pay attention to wire).
-remove the connectors from the fog lights.
-open the trunk lid.
-Unscrew two nuts on each side (one from the trunk and one outside) and remove the tail lights.
-under the rear lights, Unscrew the two screws.
-Unscrew the five screws that secure the lower part.
-wheel arches take out the rivets and removed the fender liner.
-the fender liner, Unscrew the screws holding the corners of the bumper to the wings.
-we release the latch in the wings and opening the trunk.
-with the assistant pulls back (don't want to break the wires).
-snap together the connectors of the equipment (if any).