How to remove front and rear bumper Citroen DS3

Citroën DS3 (2009-2015)

Depending on the year the site of attachment may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the four screws that secure the top.

-around the bottom part unscrew the screws (spun up).

-depending on which side we will disassemble, wrenched the wheel.

-wheel arches take out the rivets that attach the fender liner (no need to remove).

-move the wing flaps to the side and unscrew the screws holding the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper forward from the rails in the wings (don't want to break the wires).

-remove connectors from electrical equipment.

Rear bumper

-open the trunk lid.

-remove tail lights.

-around the bottom part Unscrew the screws (spun up).

-wheel arches take out the rivets and removed the arch liners (no need to remove).

-the fender liner, unscrew the screws holding the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners over), under the rear lights and opening boot.

-with the assistant pulls the back bumper (don't want to break the wires).

-snap together the connectors of electrical equipment.