Citroen SpaceTourer (2016-2023)

Depending on the year of manufacture, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood, unscrew the screws (spun down) that secure the top.

-from the bottom, unscrew the eight screws (spun up).

-in the wheel wells, unscrew the screws that secure the fender liner (front).

-for the fender liner, unscrew the screws that secure the sides of the bumper to the wings.

-we release the clips in the inner part of the wings.

-we release the clips under the hood.

-with an assistant, pull the bumper forward from the guides in the wings (be careful not to break the wires).

-disconnect the connectors from the electrical equipment (if any).

the attachment of the front bumper Spacetourer Citroen (Peugeot Traveller).

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the lid / tailgate.

-remove the lining under the rear lights (if any, depends on the type of body).

-unscrew the four screws in the boot opening.

-unscrew the screws and take out the caps from the bottom (twisted and inserted from the bottom up).

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-move the fender liner to the side and Unscrew the screws that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-we release the latch in the opening of the trunk.

-with an assistant, pull the bumper back (we'll look at the wires).

-disconnect electrical connectors (if any).

the attachment of the rear bumper Spacetourer Citroen (Peugeot Traveller)