How to remove front and rear bumper Citroen Berlingo (2008-2022)

Citroen Berlingo II B9 (2008-2022)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

The bumper is removed along with the grille.

-open the hood.

-under the hood, unscrew the six screws (spun down) that secure the top.

-on the perimeter of the lower part of the bumper, unscrew the four screws and release the three latches (the latches must be rotated 90 degrees and pulled out).

-depending on which side we will disassemble turn the wheels.

-in the wheel arches release the fender liner.

-move the fender liner to the side and unscrew, approximately under the edges of the headlights, two screws on each side that attach the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).

-remove connectors from electrical equipment.

-disconnect the headlight washer hoses (if any).

Rear bumper

-open the lid (doors) of the trunk.

-in the opening of the trunk, unscrew the screws (depending on the year, the number of screws varies).

-(if any, depends on the type of body) remove the taillights and unscrew one screw under them on each side.

-on the perimeter of the lower part, Unscrew the screws (spun up).

-in the wheel arches release the fender liner.

-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.

-release the latches in the wings (gently pull the corners towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect connectors from electrical equipment.

How to remove front and rear bumper Citroen Berlingo (1992-2002)

How to remove front and rear bumper Citroen Berlingo (2003-2012)

How to remove front and rear bumper Citroen Berlingo (2018+)