Citroen C1 II (2014-2022)
Depending on the year of manufacture, the attachment points may vary slightly.
-open the hood.
-under the hood, unscrew the five screws that secure the upper part of the bumper (radiator grille).
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches we take out the caps that attach the fender liner and side of the bumper to the wings.
-unscrew the screws at the bottom (spun up) that secure the protection and fender liner.
-we release the latch in the wings (pull the corners of the bumper down and towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws.
-from the bottom take out two pistons.
-wheel arches take out two pistons that secure the fender liner.
-take out the two pistons that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights (if you are afraid to break, remove the rear lights).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.