-Unscrew the screws (spun upwards) that secure the lower part of the bumper.
-depending on which side we will disassemble, wrenched the wheel.
-wheel arches free lockers (no need to remove).
-move the wing flaps to the side and Unscrew two screws on each side that attach the sides to the wings.
-with the assistant pulls the bumper forward from the guides (don't want to break the wires).
-remove the connectors from the equipment (if any).
-open the trunk lid.
-remove tail lights.
-Unscrew the screws under the rear lights.
-behind the bumper, from the bottom, Unscrew the screws.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-the lockers are free the retaining clips and Unscrew the one screw on each side holding the bumper corners to the wings.
-pulls the bumper back.