Depending on the model year and body type of attachment may vary.
Front bumper
-around the bottom part Unscrew the screws.
-depending on which side we will disassemble, wrenched the wheel.
-wheel arches free lockers (you can not fully remove).
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-then two options. Or trying to rip off the bumper with amplifier (fixed by the latches very securely), or under the lights, from the side of the engine compartment, Unscrew the nuts securing the booster to the body (hard to reach).
-pulls the bumper forward (don't want to break the wires and hoses).
-remove the connectors from the fog lights (if any).
-(if any) disconnected hoses to the washer (can leak fluid).
Rear bumper
-open the trunk lid.
-(if any) from the trunk, Unscrew the screws.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-from the bottom Unscrew the screws that secure the amplifier bumper to the body.
-with an assistant, carefully (don't want to break the wires) pulls the bumper back.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
