Depending on the model and year of production of the attachment may vary slightly.
Front bumper
-open the hood.
-under the hood, Unscrew the screws that secure the top.
-around the bottom part Unscrew the screws.
-depending on which side we will disassemble Unscrew the wheel.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-the fender liner, Unscrew the screws that attach the angles to the wings.
-we release the latch in the wings (pull the corners themselves).
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the four screws.
-Unscrew two screws each side and remove the tail lights.
-under the rear lights Unscrew two screws on each side.
-Unscrew the screws that attach the lower part.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-for wheel arch liners Unscrew one screw on each side that attach the angles to the wings.
-with the assistant release the latch in the wings (pull the corners themselves), and gently pulls the bumper back, see not to break the wires.
-snap together the connectors of the equipment (if any).