Depending on the model year and body type of attachment are different.
-open the hood.
-under the hood under the hood, Unscrew the four screws that secure the top.
-around the bottom part Unscrew the screws.
-wrenched the wheel to the side.
-wheel arches take out the rivets and removed the fender liner.
-for wheel arch liners Unscrew two screws on each side holding the bumper corners to the wings.
-with the assistant gently pulls the bumper forward (don't want to break the wires and hoses).
-remove the electrical connectors (if any).
-if you have headlight washers, disconnected the hoses (may leak fluid).
-open the trunk lid.
-in the opening of the trunk , Unscrew the screws (if any).
-at the bottom, Unscrew the screws and take out the caps.
-(if any) in the wheel arches Unscrew the screws that attach the angles to the wings.
-we release the latch in the wings (pull the corners themselves).
-release the clips under the rear lights (if you don't, you need to remove the rear lights).
-with the assistant remove a bumper back (don't want to break the wires).
-remove the connectors from the equipment (if any).