Depending on the year and model of the attachment may vary slightly.
-open the hood.
-under the hood, Unscrew the screws, take out the clips and remove the grille.
-around the bottom part Unscrew the screws (spun up).
-depending on what direction we will analyze wrenched the wheel.
-wheel arches, peel the fender liner.
-Unscrew two screws each side that attach the angles to the wings.
-from the side of the engine compartment, Unscrew the screws that secure the amplifier to the body (if the bumper won't come off with the amplifier).
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
-open the lid (door) of the trunk.
-in the opening of the trunk, Unscrew the five screws.
-remove tail lights.
-the rear lights on that meter Unscrew the screw on each side.
-wheel arches Unscrew the screws that attach the angles to the wings.
-Unscrew the screws that attach the lower part.
-gently pulls the bumper back.