-
-
-
Depending on the year and model of the attachment points are different.
Front bumper
The bumper is removed together with the amplifier.
-open the hood.
-under the hood, Unscrew the screws, release the clips and remove the grille.
-around the bottom part Unscrew the screws.
-from the side of the engine compartment, Unscrew two nuts from each side that secure the amplifier to the body.
-depending on which side we will disassemble Unscrew the wheel.
-(if there is) Unscrew the screws that attach the angles to the wings.
-(if any) release the latches in the wings (pull the corners themselves).
-pulls the bumper forward from the slide (don't want to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-wheel arches Unscrew the screws that attach the angles to the wings.
-Unscrew the screws (nuts) that attach the middle part.
- gently pulls the bumper back.
English 
Italiano 
Français 
русский 
Deutsch 
Español