-
-
-
Depending on the year and model of the attachment may vary slightly.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws and remove the grille.
-Unscrew the screws under the grille.
-around the bottom part Unscrew the screws (spun up).
-depending on what direction we will analyze wrenched the wheel.
-in the wheel wells, Unscrew the screws, release the fender liner.
-for wheel arch liners Unscrew one nut on each side that attach the angles to the wings.
-we release the latch in the wings.
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-open the lid (door) of the trunk.
-in the opening of the trunk, Unscrew the five screws.
-remove tail lights.
-the rear lights on that meter Unscrew the screw on each side.
-in the wheel wells, Unscrew the screws (spun upwards) holding the corners to the wings.
-around the bottom part Unscrew the screws (if any).
-gently pulls the bumper back.
English 
Italiano 
Français 
русский 
Deutsch 
Español