How to remove front and rear bumper Peugeot Partner Tepee (2009+)
Depending on the year and model of the attachment may vary slightly.
Front bumper
The bumper is removed along with the grille.
-open the hood.
-under the hood, unscrew the screws and take out the caps (twisted and inserted top to bottom) that secure the upper part.
-around the bottom part unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-depending on what direction we will analyze wrenched the wheel.
-wheel arches, peel the fender liner.
-move the wing flaps to the side and twisted in the wings (about under the edges of the headlights) two screws each side that attach the bumper to the wings.
-we release the latch in the wings (pull the corners themselves).
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the equipment (if any).
Rear bumper
-open the lid (door) of the trunk.
-in the opening of the trunk, unscrew the screws (depending on year, the number of changes).
-remove tail lights.
-(if any) under the rear lights on that meter unscrew the screw on each side.
-around the bottom part unscrew the screws and take out the caps.
-wheel arches, peel the fender liner.
-the fender liner, unscrew the screws that attach the angles to the wings.
-we release the latch in the wings (gently pull the corners themselves).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
