BMW X6 II (F16) (2014-2019)

Depending on the year of manufacture, the attachment points may differ slightly.

Front bumper

-open the hood.

-unscrew the five screws that secure the top of the bumper.

-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the lower part of the bumper.

-wheel the wheels to the side.

-take out the rivets in the wheel arches and release the fender liners from the bumper (keep on the latches, pull towards ourselves, starting from the bottom).

-the lining, unscrew the screws that secure the wheel arch liners (front part).

-we move the wheel arch liners to the side and unscrew two screws on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.

-release the clips in the wings (pull the corners of the bumper down and towards ourselves).

-under the hood, release the upper part of the bumper from the clips (you need to lift it up).

-with an assistant, gently pull the bumper forward (look behind the wires and hoses).

-we disconnect the connectors of the electrical equipment.

- (if any) disconnect the headlight washer hoses (liquid may leak).

front bumper attachment points BMW X6 F16

BMW X6 F16 Front Bumper Mounting Diagram

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-from the trunk, unscrew and remove the taillights.

-under the rear lights, unscrew one screw on each side (twisted from top to bottom).

-take out the light reflectors from the bumper (they are held on the latches).

-unscrew one screw on each side under the reflectors.

-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.

-in the wheel arches, take out the caps and release the fenders from the bumper (they are held on the latches, pull towards ourselves).

-under the pads, unscrew the screws that secure the sides of the bumper.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches under the rear lights.

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

mounting points for the rear bumper BMW X6 F16

BMW X6 F16 Rear Bumper Mounting Diagram

 

How to remove front and rear bumper BMW X6 (E71)