How to remove front and rear bumper BMW 2-series (F45, F46)

BMW 2 Active Tourer (F45), BMW 2 Gran Tourer (F46).

Depending on the year of manufacture and the type of body, the attachment points may slightly differ.

Front bumper

-open the hood.

-Unscrew the six screws (twisted from top to bottom) that secure the upper part.

-from the bottom side, Unscrew ten screws (twisted from bottom to top) that secure the bottom of the bumper.

-wheel the wheels depending on which side we will disassemble.

-in the wheel arches, Unscrew the screws that secure the wheel arch liners (front part).

-takes the wheel arch liners to the side, and unscrew two screws on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.

-release the clips in the wings (pull the corners of the bumper towards you).

-release the clips under the hood, in the upper part of the bumper.

-with an assistant, we pull the bumper forward (look behind the wires).

-we disconnect the connectors of the electrical equipment.

Rear bumper

-open the trunk lid.

-remove the rear lights.

-Unscrew ten screws from the bottom side (screwed from bottom to top).

-in the wheel arches, Unscrew two screws on each side that secure the wheel arches.

-we move the wheel arch liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.

-Unscrew one screw on each side under the taillights.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the clips under the rear lights.

-with an assistant, we pull the bumper back (look behind the wires).

-we disconnect the connectors of the electrical equipment.

How to remove front and rear bumper BMW 2-series (F22, F23)