How to remove front and rear bumper BMW X5 E70

Front bumper

-open the hood and in front of the radiator Unscrew the five screws.

-throughout the length of the lower part of the bumper, Unscrew the screws.

-Unscrew the wheel left or right depending on which side will Unscrew first.

-wheel arches Unscrew the screws that attach the fender liner to the bumper.

-edge of the bumper and the top part under the headlights are exempt from latches and pulls it forward (to make it better with a helper).

-if you have sensors, remove the common connector.

-the bumper is cleared.

Rear bumper

-throughout the length of the lower part of the bumper, Unscrew the screws.

-left and right side and pull out the caps and remove part of the lining of the wing, which are adjacent to the bumper.

-under the covers, Unscrew one bolt on each side.

-in the wheel arch, Unscrew the bolts that fasten the inner fender  (so as not to remove the wheels, you can use a ratchet head).

-take out the reflectors (are mounted on the latches).

-under the reflectors Unscrew one bolt on each side.

-if there are sensors, Veselkova a common connector.

-rip off the bumper with latches and pulls  on itself  (so as not to scratch the paint  better to do it together).