How to remove front and rear bumper Fiat Ulysse (1994-2002)

Fiat Ulysse I (1994-2002)

Front bumper

-open the hood.

-remove the direction indicators and unscrew the two screws behind them.

-unscrew the four screws, release the clips and remove the grille.

-unscrew three screws on each side and remove the headlights.

-from the side of the engine compartment, unscrew the six nuts that secure the bumper to the body.

-in the wheel arches, we release the fender liner (front).

-from the bottom, unscrew the seven screws (spun up).

-with an assistant, pull the bumper forward from the guides in the wings (look for the wires).

-remove connectors from electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the two screws.

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-unscrew one screw on each side that attach the corners of the bumper to the wings

-from the bottom, unscrew the screws (spun up).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).