How to remove front and rear bumper Fiat Ulysse (2002-2010)

Fiat Ulysse II (2002-2010)

Front bumper

-open the hood.

-under the hood take out the caps that secure the lining and the upper part of the bumper.

-depending on which side we will disassemble, turn the wheels.

-in the wheel wells, unscrew the screws that secure the fender liner (front).

-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.

-on the perimeter of the lower part of the bumper, unscrew the screws (spun up).

-with an assistant, release from the latches and pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the five screws.

-from the bottom, unscrew the two screws and two nuts.

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.

-with an assistant, pull the bumper back from the guides in the wings (look for the wires).

-disconnect electrical connectors (if any).

How to remove front and rear bumper Fiat Ulysse (1994-2002)