-
-
-
Fiat Bravo II (2007-2014)
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-Unscrew the screws from the bottom (spun up) that secure the lower part.
-wrenched the wheel to the side.
-in the wheel wells, Unscrew the screws and peel the fender liner (front part).
-Unscrew the screws holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners themselves).
-pulls the bumper forward (look for wires).
-snap together the connectors of electrical equipment.
Rear bumper
-open the trunk lid.
-remove tail lights.
-from the bottom Unscrew the screws (spun up) that secure the lower part.
-in the wheel wells, Unscrew the screws and peel the fender liner (rear part) to not remove the wheels, need a ratchet with a nozzle.
-Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings and under the tail lamps (gently pull the corners themselves).
-with the assistant pulls the bumper backwards (look for wires).
-snap together the connectors of the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español