Depending on the model year and body type of the attachment points are slightly different.
-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-Unscrew the screws around the perimeter of the bottom (spun up).
-wrenched the wheel to the side.
-in the wheel wells, Unscrew the screws and peel the fender liner (front part).
-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners of the bumper itself).
-pulls the bumper forward (look for wires).
-snap together the connectors of electrical equipment.
-open the lid (door) of the trunk.
-Unscrew three screws on each side and pull themselves rear lights (hold on clips).
-under the rear lights Unscrew one screw on each side.
-in the opening of the trunk, Unscrew the screws.
-from the bottom Unscrew the five screws that secure the lower part.
-wheel arches Unscrew two screws on each side and removed the wheel arches (rear).
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners themselves).
-with the assistant pulls the bumper backwards (look for wires).
-snap together the connectors of the equipment (if any).