How to remove front and rear bumper Fiat Ducato (2014-2023)

Fiat Ducato III (2014-2023)

Front bumper

-open the hood.

-unscrew the screws and remove the headlights.

-unscrew the eight screws (spun down) that secure the upper part of the bumper (radiator grille).

-unscrew the screws that secure the lower part of the bumper (spun up).

-unscrew the screws in the wheel arches that secure the fender liner (front).

-unscrew two screws on each side that secure the sides of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-remove connectors from electrical equipment (if any).

Rear bumper

-open the tailgate.

-in the opening of the trunk, unscrew the eight screws that secure the central and side parts of the bumper (the side parts of the bumper can be removed without the central).

-unscrew two screws in the wheel arches and three from the side of the bottom on each side, remove the tank lining of the wings (hold on hidden caps, pull towards you).

-for the overlays, unscrew three screws on each side that secure the side parts of the bumper.

-unscrew the screws from the bottom.

-(if any) Unscrew the screws and remove the stops.

-remove the side parts of the bumper (pull towards you).

-remove the central part.

-disconnect electrical connectors (if any).

How to remove front and rear bumper Fiat Ducato (1993-2006)

How to remove front and rear bumper Fiat Ducato (2006-2014)