How to remove front and rear bumper Fiat Ducato (2006-2014)
Fiat Ducato III (2006-2014)
Depending on the body type, the attachment points may differ.
Front bumper
-open the hood.
-between the headlights, unscrew the screws that secure the upper part of the bumper (radiator grille).
-remove the lining under the headlights.
-unscrew the screws under the headlights.
-unscrew the screws from the bottom (spun up) that secure the lower part of the bumper.
-unscrew the screws in the wheel arches that secure the fender liner (front).
-move the fender liner to the side and unscrew two screws on each side that secure the sides of the bumper to the wings.
-we release the clips in the wings (pull the sides of the bumper down).
-with an assistant, pull the bumper forward (look for the wires).
-remove connectors from electrical equipment (if any).
Rear bumper
-open the tailgate.
-in the opening of the trunk, unscrew the screws that secure the central and side parts of the bumper (the side parts can be removed without the central).
-unscrew five screws on each side, remove the tank lining of the wings (moldings) (hold on latches, pull towards you).
-for the pads, unscrew three screws on each side.
-unscrew the screws from the bottom.
-remove the side parts of the bumper (pull towards you).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
