How to remove front and rear bumper Fiat Punto (1993-1999)

Fiat Punto I (1993-1999)

Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood, unscrew the two screws (spun down).

-turn the wheels to the side.

-in the wheel wells, unscrew three screws on each side that secure the fender liner (front).

-for the fender liner, unscrew two (one) screws on each side that secure the sides of the bumper to the wings.

-(if any) unscrew the two screws in the front of the bumper, above the fog lights.

-(if any) remove the direction indicators and unscrew the two screws under them.

-unscrew the screws from the bottom.

-with an assistant, pull the bumper forward (look for the wires).

-remove connectors from electrical equipment (if any).

front bumper attachment points Fiat Punto I (1993-1999)

Front bumper mounting scheme Fiat Punto I (1993-1999)

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk, unscrew the four screws.

-in the wheel wells, unscrew two screws on each side that secure the fender liner.

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom, Unscrew the four screws (spun up).

-with an assistant, pull the bumper back.

 rear bumper attachment points Fiat Punto I (1993-1999)

Rear bumper mounting scheme Fiat Punto I (1993-1999)

 

How to remove front and rear bumper Fiat Punto 2 (1999-2010)

How to remove front and rear bumper Fiat Punto 3 (2005-2018) (Grande/Evo)