How to remove front and rear bumper Fiat Croma (2005-2011)

Fiat Croma II (2005-2011)

Depending on the year of release of attachment is different.

Front bumper

-open the hood.

-under the hood, Unscrew the screws that secure the top.

-(until 2007) remove the grille under it and Unscrew the three screws.

-wrenched the wheel to the side.

-in the wheel wells, Unscrew the screws and peel the fender liner (front part).

-for wheel arch liners Unscrew two screws (after 2007 one) on each side that attach the bumper corners to the wings.

-Unscrew the screws around the perimeter of the bottom.

-(after 2007) release the latches in the wings (pull the corners themselves).

-pulls the bumper forward (look for wires and hoses).

-snap together the connectors of electrical equipment.

-if you have headlight washers, detachable hoses.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws (spun down).

-Unscrew two screws each side and pull themselves rear lights.

-under the rear lights Unscrew two screws on each side.

-in the side panels of the trunk remove the cap (need to get into the inner part of the wings).

-in the inner part of the wings, Unscrew the screws and nuts.

-from the bottom Unscrew the screws that secure the lower part of the bumper.

-in the wheel wells, Unscrew the screws (rivets) and removed the fender liner (rear part).

-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.

How to remove front and rear bumper Fiat Croma (1985-1996)