How to remove front and rear bumper Fiat Multipla

Despite the external difference, the bumper from Fiat Multipla 1998-2004 and 2004-2010 model years are attached practically the same.

Depending on the year the site of attachment may vary slightly.

Front bumper

-open the hood.

-under the hood, Unscrew the screws that secure the top.

-Unscrew the screws around the perimeter of the bottom (spun up).

-wrenched the wheel to the side.

-wheel arches Unscrew three screws on each side, release the fender liner (front part).

-attach the fender liner to the side and Unscrew two screws on each side holding the bumper corners to the wings.

-pulls the bumper forward (look for wires).

-snap together the connectors of the fog lights (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the six screws.

-Unscrew the screws (spun up) that secure the lower part.

-wheel arches Unscrew three screws on each side and removed the wheel arches (rear).

-for wheel arch liners Unscrew two screws on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.