Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-Unscrew the screws around the perimeter of the bottom (spun up).
-wrenched the wheel to the side.
-wheel arches Unscrew two screws on each side and removed the wheel arches (the front part).
-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners themselves).
-pulls the bumper forward (look for wires).
-snap together the connectors of the fog lights (if any).
Rear bumper
-open the lid (door) of the trunk.
-in the opening of the trunk, Unscrew the two screws.
-Unscrew the screws (spun up) that secure the lower part.
-wheel arches Unscrew two screws on each side and removed the wheel arches (rear).
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners themselves)
-with the assistant pulls the bumper backwards (look for wires).
-snap together the connectors of electrical equipment.
How to remove front and rear bumper Fiat Punto 1 (1993-1999)
How to remove front and rear bumper Fiat Punto 2 (1999-2010)