Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood, Unscrew the six screws that secure the top.

-around the bottom part Unscrew the screws.

-(if any) release the arch trims latches (pull towards you).

-wrenched the wheel to the side.

-in the wheel wells, Unscrew the screws and peel the fender liner (front part).

-move the wing flaps to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-pulls the bumper forward (look for wires).

-snap together the connectors of electrical equipment.

The attachment of the front bumper of the Fiat 500L (500X)

The scheme of fastening of the front bumper of the Fiat 500L (500X)

Rear bumper

-open the trunk lid.

-in the side panels of the trunk opening hatches and Unscrew the screws under them.

-remove tail lights.

-under the tail lights release the fastening.

-from the bottom Unscrew the screws and take out the caps.

-(if there is) Unscrew the screws in the opening of the trunk.

-(if any) is released from the latch (pull to yourself) lining of the wings.

-wheel arches Unscrew two screws on each side and removed the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.

The attachment of the rear bumper of the Fiat 500L (500X)

Diagram of rear bumper Fiat 500L (500X)