Front bumper

-open the hood.

-under the hood, Unscrew the four screws and remove the grille.

-under the grille, Unscrew the three screws.

-Unscrew the four screws around the perimeter of the bottom (spun up).

-wrenched the wheel to the side.

-wheel arches Unscrew one screw on each side, release the fender liner (front part).

-attach the fender liner to the side and Unscrew two screws on each side holding the corners of the bumper to the wings (far screws may be driven through the openings, if you remove the headlights).

-pulls the bumper forward (look for wires).

-snap together the connectors of the fog lights (if any).

The attachment of the front bumper Fiat Panda 2 (2003-2012)

The scheme of fastening of the front bumper Fiat Panda 2 (2003-2012)

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the four screws.

-Unscrew the two screws (spun up) that secure the lower part.

-wheel arches Unscrew two screws on each side and removed the wheel arches (rear).

-Unscrew two screws on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connecDiagram of rear bumper Fiat Panda 2 (2003-2012)

tors of the equipment (if any).

The attachment of the rear bumper Fiat Panda 2 (2003-2012)