How to remove front and rear bumper Fiat Sedici

Fiat Sedici (2005-2014)

Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood, unscrew the four screws that secure the top of the bumper.

-turn the wheels to the side.

-in the wheel wells, unscrew the screws (caps) that secure the fender liner (front).

-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom, unscrew the seven screws (spun up).

-we release the bumper clips in the wings (pull the corners towards you).

-with an assistant, pull the bumper forward (look for the wires).

-remove connectors from electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the two screws.

-wheel arches take out three pistons and unscrew one screw on each side that secure the sides.

-from the bottom, unscrew the two screws and take out the two pistons.

-we release the latch in the wings (pull the corners of the bumper).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).