Depending on the year the site of attachment may vary slightly.

Front bumper

-open the hood.

-under the hood, Unscrew the four screws that secure the top.

-around the bottom part Unscrew the screws.

-wrenched the wheel to the side.

-wheel arches Unscrew two screws on each side and removed the wheel arches (the front part).

-move the wing flaps to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-pulls the bumper forward (look for wires).

-snap together the connectors of electrical equipment.

Mounting locations for front bumper Fiat 500

The scheme of fastening of the front bumper Fiat 500

Rear bumper

-open the trunk lid.

-in the opening of the trunk Unscrew two screws on each side and remove the tail lights.

-under the rear lights Unscrew one screw on each side.

-from the bottom Unscrew the screws.

-wheel arches Unscrew two screws on each side and removed the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.

The attachment of the rear bumper Fiat 500

Diagram of rear bumper Fiat 500