How to remove front and rear bumper Fiat Siena

Fiat Siena I (1997-2007)

Depending on the year of manufacture, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood, unscrew the screws that secure the upper part of the bumper.

-turn the wheels to the side.

-in the wheel wells, unscrew the screws that secure the fender liner (front).

-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.

-from the bottom, unscrew the four screws (spun up).

-(if any) remove the direction indicators and unscrew the screws under them.

-with an assistant, pull the bumper forward (look for the wires).

-remove connectors from electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the four screws.

-we release the side trim of the trunk.

-behind the skins, unscrew two screws on each side (if there is one nut), in the inner part of the wings.

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the fenders

-from the bottom, unscrew the screws (spun up).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.