How to remove front and rear bumper Fiat Freemont

Fiat Freemont (2011-2020)

Depending on the year of manufacture, the attachment points differ.

Front bumper

-open the hood.

-under the hood we take out four pistons (inserted from top to bottom) that secure the upper part (radiator grille).

-take out the six caps that secure the lower part of the bumper (inserted from the bottom up).

-in the wheel wells take out three pistons on each side that secure the fender liner (front).

-remove the fender liner to the side and unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the headlights.

-with an assistant, pull the bumper forward (look for the wires).

-remove connectors from electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk take out six caps.

-wheel arches take out three pistons on each side that secure the fender liner (rear).

-move the fender liner to the side and Unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).

-we release the clips below the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).