How to remove front and rear bumper Dodge Durango (2011-2013)
Dodge Durango III WD (2011-2013)
Front bumper
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches we take out two pistons on each side that secure the lining of the arches.
-release from the latches (pull towards you) and remove the lining of the arches.
-under the covers, unscrew two screws on each side that secure the sides of the bumper.
-we release the clips (you need to turn counterclockwise) and unscrew the screws that secure the bottom of the bumper.
-we release the latches in the wings and under the headlights (pull the corners towards you).
-with an assistant, pull the bumper forward (be careful not to break the wires).
-remove the connectors from the fog lights.
-the grille can be removed after removing the bumper. We take out the caps under the hood and unscrew the two screws near the headlights. We release the upper part of the grille from the latches (pull up).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew the screws.
-from the side of the bottom, we release the clamps that secure the lower part.
-in the wheel arches we take out the caps that secure the lining of the arches.
-release from the latches (pull towards you) and remove the lining of the arches (rear).
-under the covers, unscrew the screws that secure the sides of the bumper.
-we release the latches in the wings (pull the corners towards ourselves) and in the opening of the trunk.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
