Depending on the year of issue and the body of the attachment may vary.

Front bumper

-open the hood.

-under the hood take out the rivets and remove the plate.

-under the pickguard, Unscrew the screws and pull out on the grille.

-Unscrew the screws and pull out on the headlight.

-in the opening of the headlight, Unscrew the screws and nuts that secure the upper part of the bumper.

-(if they are separate) is released from the latches and pulls on the upper part of the bumper.

-wrenched the wheel to the side.

-wheel arches Unscrew the screws that attach the fender liner.

-move the wing flaps to the side and Unscrew the screws that attach the angles to the wings.

-from the side of the engine compartment Unscrew the nuts that attach the booster to the side members.

-(if there is) Unscrew the screws that attach the bottom part.

-with the assistant pulls the bumper forward (don't want to break the wires).

-remove the connectors from the fog lights (if any).

scheme of fastening of the radiator grille Dodge Ram (2009-2018)

the scheme of fastening of a forward bumper Dodge Ram (2009-2018)

the scheme of fastening of a forward bumper Dodge Ram (2009-2018)

the scheme of fastening of a forward bumper Dodge Ram (2009-2018)

the scheme of fastening of a forward bumper Dodge Ram (2009-2018)

the scheme of fastening of a forward bumper Dodge Ram (2009-2018)

the scheme of fastening of a forward bumper Dodge Ram (2009-2018)

Rear bumper

-under the car and remove the connectors with electrical equipment.

-Unscrew the screws in the middle of the bumper.

-inside Unscrew the bolts that secure the amplifier to the side members.

-with the assistant pulls the bumper back.

diagram of rear bumper Dodge Ram (2009-2018)

diagram of rear bumper Dodge Ram (2009-2018)