How to remove the front and rear bumper Dodge Magnum (2003-2008)

Dodge Magnum II (2003-2008)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood take out six caps (inserted from top to bottom) that secure the upper part of the bumper.

-depending on which side we will disassemble, turn the wheels.

-wheel arches take out three pistons on each side, which are fender liner (front).

-move the fender liner to the side and Unscrew two screws on each side (spun up) that secure the corners of the bumper to the wings.

-unscrew the twelve screws (spun up) that secure the bottom of the bumper.

-with an assistant, pull the bumper forward from the guides in the wings (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening we take out three pistons and two stops of the trunk lid.

-in the wheel wells, unscrew three screws on each side (there may be caps) that secure the fender liner (rear).

-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-with an assistant, pull the bumper back from the guides in the wings (look for the wires).

-on the right side, disconnect the electrical connectors.