Dodge Ram Van III (1993-2003)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
-open the hood.
-unscrew the screws and remove the grille.
-unscrew three screws on each side and release the fender liner (front).
-unscrew the two screws at the bottom.
-disconnect electrical connectors (if any).
-from the side of the engine compartment, Unscrew the four nuts that secure the bumper to the brackets.
-with an assistant, pull the bumper forward.
-disconnect the license plate lighting connectors.
-unscrew the bolts securing the bumper support brackets to the body.
-with an assistant, pull the bumper back.