-
-
-
Dodge Durango II ND (2004-2009)
Depending on the year of release of the attachment can vary.
Front bumper
-depending on which side we will disassemble, wrenched the wheel.
-wheel arches unscrew three screws on each side.
-unscrew two screws on each side (spun upwards) holding the corners to the wings.
-unscrew the four screws (spun upwards) holding the bottom of the bumper.
-release the latch under the grille.
-with the assistant pulls the bumper forward (watching not to cut wires).
-remove the connectors from the fog lights.
Rear bumper
-open the trunk lid.
-in the opening of the trunk pulls out five caps.
-take out the caps (inserted from the bottom up) that secure the lower part.
-wheel arches Unscrew three screws on each side.
-with the assistant pulls the bumper back.
-(if you have one) remove the connectors of electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español