How to remove front and rear bumper Dodge Stratus

Despite the appearance of differing bumper from the first and second generation Dodge Stratus similar.

Front bumper

-open the hood.

-under the hood take out the caps (Unscrew the screws) that secure the top.

-wrenched the wheel to the side.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner (all the wheel arches to remove unnecessary).

-move the wing flaps to the side and Unscrew the screws that attach the angles to the wings (spun up).

-Unscrew the screws (take out the rivets) that attach the lower part (spun up).

-with the assistant pulls the bumper forward (don't want to break the wires).

-remove the connectors from the fog lights (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws.

-(coupe) remove the tail lights and Unscrew the screws under them.

-exempt in the trunk side trim.

-from the trunk, Unscrew the nuts (screws) in the wings.

-Unscrew the screws (take out the rivets) in the wheel arches that secure the fender liner.

-move the wing flaps to the side and Unscrew the screws (spun upwards) holding the corners to the wings.

-Unscrew the screws (spun up) that secure the lower part.

-with the assistant pulls the back bumper (don't want to break the wires).

-remove the connectors from the light plate.