Dodge Dart PF (2013-2016)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out eight caps and two screws, remove the trim.
-under the trim, unscrew the four screws and take out the eight caps (twisted and inserted from top to bottom) that secure the top.
-we release the latches of the upper part of the bumper (pull up).
-turn the wheels to the side.
-unscrew three screws on each side in the wheel arches that secure the fender liner (front).
-unscrew the screws (spun up) that secure the corners of the bumper to the wings.
-unscrew the eight screws from the bottom (spun up).
-we release the latch in the wings (pull the sides towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-in the trunk, we release the edges of the side trims.
-for the skins, unscrew two nuts on each side and remove the taillights.
-in the wheel wells, unscrew three screws on each side that secure the fender liner.
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-from the bottom, take out the four pistons and unscrew the two screws.
-unscrew the two screws above the caps (closer to the middle of the bumper).
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights and in the opening of the trunk.
-with an assistant, pull the bumper back (look for the wires).
-on the right side, disconnect the electrical connectors.