Dodge Ram III DR/DH (2002-2008)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
Front bumper
-open the hood.
-from the back of the bumper, from the side of the engine compartment, Unscrew the four nuts that secure the amplifier to the frame.
-unscrew the screws that secure the fender liner (front).
-for the fender liner, unscrew the nuts that attach the sides of the bumper to the wings.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect the connectors from the electrical equipment (if any).
Rear bumper
-disconnect electrical connectors.
-from the bottom, unscrew two nuts on each side that secure the amplifier to the frame.
-unscrew the two screws in the central part.
-with an assistant, pull the bumper back.
How to remove front and rear bumper Dodge Ram (1994-2002)
How to remove front and rear bumper Dodge Ram (2009-2018)
How to remove front and rear bumper Dodge Ram (2019+)