-
-
-
Dodge Durango I DN (1998-2003)
Depending on the year of manufacture and body type, the attachment points may vary slightly.
Front bumper
-open the hood.
-near the headlights, unscrew two bolts on each side (spun down).
-turn the wheels to the side.
-(if any) unscrew three screws on each side in the wheel arches that secure the fender liner (front).
-climb under the car.
-disconnect electrical connectors.
-unscrew two bolts on each side that attach the brackets to the spars.
-with an assistant, pull the bumper forward.
Rear bumper
-wheel arches take out three pistons on each side.
-climb under the car.
-disconnect electrical connectors.
-unscrew the nuts securing the bumper support brackets to the rear rails and cross member.
-with an assistant, pull the bumper back.
English 
Italiano 
Français 
русский 
Deutsch 
Español