Dodge Journey (2007-2020)
Depending on the year the site of attachment may vary slightly.
Front bumper
-open the hood.
-under the hood, take out the four clips that secure the upper part.
-wrenched the wheel to the side.
-wheel arches pulled three pistons on each side that attach the fender liner.
-move the wing flaps to the side and Unscrew one screw on each side that attach the angles to the wings.
-take out the caps on the perimeter of the bottom.
-we release the latch in the wings (pull the corners themselves).
-release the clips under the headlights.
-with the assistant pulls the bumper forward (don't want to break the wires).
-remove the connectors from the fog lights and temperature sensor (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk pulls out six caps.
-wheel arches unscrew four screws on each side that secure the wheel arches and bumper corners to the wings.
-we release the latch in the wings (pull the corners themselves).
-release the clips under the rear lights (pull the corners back).
-with the assistant pulls the bumper back.